Roots Blower Wastewater Treatment

Bore size:50-300mm(2-12″)

Pressure Rise:9.8-98Kpa

Air Capacity:0.6-184m³/min

Motor Power:0.75-280kw

Lubrication:Oil

Drive model:Belt or Coupling

Introduction-Roots Blower Wastewater Treatment

Shangu three lobes Roots Blower are new series Roots type blowers. With the help of CNC machine, we made precise rotors and casings to get a perfect gap to promote air performance, lower vibrations and noises results a significant improvement compared to traditional two lobe Roots Blower.Traditional Roots Blower lubricate bearings and gears with grease and oil.Shangu blowers with double oil tank need oil only.It is very convenient to maintain and oil has a better lubricating effect than grease. So it could be a longer bearings and gears life.

1. Inlet Filter

2. Motor

3. Roots blower

4. Safety Valve

5. Pressure Gauge

6. Flexible Connector

7. Outlet Silencer

8. Butterfly Valve

9. Empty Silencer

10. Tee Joint

11. Main Pipe

12. Check Valve

Operating Principle-Roots Blower Wastewater Treatment

The blower is of positive displacement type roots blower, and sends a fixed amount of air in proportion to its rotation speed.With the three-lobed rotors, the two rotors make three intake and exhaust cycles per revolution. Because the air has less pulse compared with the two-lobed type, fluctuations in load, noise and vibration are small. While the two three-lobed rotors mounted on two parallel shafts maintain only a very small clearance between themselves and the inner surfaces of the oval casing operation chamber and between each other, they are driven by timing gears, moving a fixed volume of the air enclosed by the casing and rotors from the intake side to the output side. The roots blower is free of Internal lubrication. And its simple design, easy handling, and stable performance make a wide range of applications possible.

Specifications

Model	Diameter/mm	Pressure/kPa	Air volume m3 /min	Horse Power/kw
RSR50	50	9.8-78.4	0.64-3.07	0.75-5.5
RSR65	65	9.8-78.4	1.36-4.13	0.75-7.5
RSR80	80	9.8-98.0	2.35-6.43	1.5-18.5
RSR100	100	9.8-78.4	3.75-10.31	2.2-18.5
RSR125	125	9.8-98.0	4.91-13.66	4-37
RSR150C	150	9.8-58.8	9.28-18.38	4-30
RSR150	150	9.8-98.0	12.63-30.19	5.5-75
RSR175A	150	9.8-88.2	13.88-42.78	7.5-55
RSR175	150	9.8-58.8	19.21-41.05	11-75
RSR200H	200	9.8-98.0	25.73-50.15	11-110
RSR200	200	9.8-98.0	33.01-59.32	15-160
RSR250D	250	9.8-58.8	42.84-118.92	22-110
RSR250	250	9.8-98.0	56.43-85.22	37-220
RSR300	300	9.8-98.0	84.06-141.30	45-280
RSR300C	300	9.8-58.8	117.11-198.63	45-315